Page 2727 - Benma | Blue book 5.0

Fall Arrest Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
438537 Safety Set 5 SpanSet
Mobile climbing protection for all situations, lightweight, handy, reliable, packed in a practical
storage bag.
Comprising:
1 pce. 2-point safety harness E2PSV
1 pce. horizontal restraining rope CHL
1 pce. sling loop 1m
1 pce. practical storage bag
Order ID Type Length
m
438537.0100 SS-5SV 10
438537.0200 SS-5ASV 15
438537.0300 SS-5BSV 20
438601 Guide rope with counterweight MILLER 20 m
20 m
Guide rope made of 10.5 mm kernmantle rope with carabiner (CS20) and rope weights. Suitable
for vertical, horizontal applications and on pitched roofs, for instance, combined with descen-
der or sliding safety harness. Rope weights and screw-on carabiner (ML00) included in the package
contents. Complies with EN696.
Order ID Length
m
438601.0100 20

438602 Safety harness MILLER
for 14/16 mm rope and fastener
Rope: polyamides Ø 12 mm
Fasteners: stainless steel complies with EN 362(04)
Opening: 17 mm
Breaking load: 25 kN
Safety harnesses prevent the user from falling when ascending or descending. Automatic
locking in vertical use, the self-actuating device slides along freely on the rope. Suitable for ropes
at 14-16 mm. Especially appropriate on pitched roofs, where fall arresters may respond too slowly.
The fastener affords a convenient means of fastening at the harness‘ front anchorage ring.
Fastener (0.3 m) and screw-on carabiner (ML00) included in the package contents.
Order ID Length Width Thickness
m mm mm
438602.0100 82 410 64

438603 TurboLite fall limiter Miller
Belt band 2 m with frame hook + Twistlock
Extremely lightweight fall arrester with 2 m working length. Inspection not required (only an-
nual visual check by a specialist necessary). Product service life 10 years from date of manufac-
ture. Approved for user weights up to 136 kg (depending on the fall factor). Tested for horizontal
and vertical applications.
Order ID Type
438603.0100 Gerüsthaken + Twistlock

438604 Fastener MILLER
Connection strap - 400 mm
Belt band: width 27 mm, length 400 mm, made of polyester, tear resistance up to 3000
daN.
MS51 automatic carabiner: rough material made of galvanised steel, EN 362, break resis-
tance up to 2200 daN.
The extension belt is suitable for all harnesses and is used to make it easier for the user to attach
the fastener to the D ring. Because the belt holder often does not get close enough to its rear D
ring – however with this extension it can make the connection quickly and easily. In this case, this
connection belt is attached before attaching the belt to the D ring.
Load capacity: up to 22 KN, temperature: -30°C up to + 50°C
Order ID Length
mm
438604.0100 400

2716 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch