Page 2604 - Benma | Blue book 5.0

Hand protection Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
430601 Electrical gloves ELECTROSOFT
Class 3, red

per pair, for electrical work at voltage up to 26500 volts, insulating glove made of red natu-
ral latex, straight edge, ergonomic shape, lightly powdered, good dexterity, thickness 2.9 mm,
length 410 mm, individually packed in a polybag.
CE Category III
Must be used with leather overglove.
Serviceable life: Gloves used frequently should be inspected at intervals of 6 months at the lon-
gest. Gloves used only occasionally should be inspected after every use and generally at intervals
of 12 months at the longest. Gloves from inventory stock should be inspected at intervals of 12
months at the longest.
Information about storage: Store in original package (individually packed to protect against light
and UV rays with instructions for use). Do not compress or crease. The gloves must not be exposed
to heat sources (sunlight, heating appliances, artificial light). Storage between 10°C and 21°C.
Care instructions: Any kind of damage or perforation makes the glove unusable, do not expose
to solvents or chemicals, do not use in damp conditions, clean with soap and water only, dry at
ambient air humidity below 65°C.
Order ID Size Order ID Size
430601.0100 8 430601.0300 10
430601.0200 9 430601.0400 11

430700 Chemical-resistant gloves EKASTU

Per pair, very robust design, colour green. These chemical-resistant gloves are fully coated in
polyvinyl chloride and cotton-lined, and very abrasion-proof; they provide protection from EN 374-1/374-2/374-3/388/420
mechanical hazards and certain chemicals such as grease, oil, most acids and alkalis. Ma-
ximum abrasion resistance as defined in DIN EN 388, maximum service life as a result.
CE Category III
Order ID Size Length Order ID Size Length
cm cm
430700.0100 10 28 430700.0300 10 40
430700.0200 10 35 430700.0400 10 60
430232 Cutting protection sleeves MARIGOLD
FIREBLADE FS14/FS18

EN 388:134X+EN 407:X
Per piece, of finely-knitted KEVLAR, double-thickness material, thumbhole, integrated elastic bor-
der at opening, 35cm and 45 cm long, one size fits all.
CE Category II
Order ID Length Order ID Length
mm mm
430232.0100 350 430232.0200 450
430234 Cut protection sleeves KCL
ArMEX 961

EN 388:1340
per piece, made of para-aramide (polymeric plastics), double layer, with thumb hole, good fit and
hold, many possible combinations with other protective gloves, high cut protection, heat insula-
tion with medium heat production up to 100 °C, good wearing comfort, washable.
CE Category II
Order ID Length Order ID Length
mm mm
430234.0100 360 430234.0200 420

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2593