Page 2596 - Benma | Blue book 5.0

Hand protection Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
430300 Welding gloves

As pair, in soft textured cowhide leather stiff cuffs, supple leather, length 35 cm, the gloves
most often used for oxyfuel, electrogas, MIG/MAG and gas-shielded welding. Leather thickness
1.2 mm.
CE Category II EN 388:3121
Order ID Size Order ID Size
430300.0050 9 430300.0200 11
430300.0100 10
430310 Welding gloves

As pair, in heat-resistant special split leather, insulating molleton lining, length 33 cm; for oxy-
fuel, electrogas, MIG/MAG and gas-shielded welding, for oxyfuel cutting. Leather thickness 1.3
mm.
EN 388:4143
CE Category II
Order ID Size Order ID Size
430310.0050 9 430310.0200 11
430310.0100 10
430291 Welder‘s gloves
BIHAR
Full Nappa leather with leather cuff hole, inserted thumb, leather finger gussets, length approx.
35 cm
CE Category II
Order ID Size Order ID Size
430291.0100 9 430291.0300 11
430291.0200 10

430319 Heat protection gloves

per pair, elastic Kevlar glove with thick wool lining, leather cuff, 350 mm long, heat-resistant
up to +350°C with very good insulation, long service life because wearable on both sides, good
grip sensitivity.
EN 388:254X
CE Category II
Order ID Size
430319.0100 10
430370 Disposable vinyl gloves SEMPERGUARD

Vinyl, rolled edge, inside lightly powdered, good resistance to oil and grease, but not resistant
to acids and alkalis, suitable for use in plastics processing, work with adhesives, paints, resins, etc.
Wall thickness 0.08 mm.
Designs:
430370.0100 S in dispenser box of 100 EN 374
430370.0200 M in dispenser box of 100
430370.0300 L in dispenser box of 100
430370.0400 XL in dispenser box of 90
CE Category I
Order ID Size Order ID Size
430370.0100 S 430370.0300 L
430370.0200 M 430370.0400 XL

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2585