Page 2472 - Benma | Blue book 5.0

Electric tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
4 66080 Drill BOSCH
mechanical two-speed gearbox, control electronics, speed pre-selection with thumbwheel,
anticlockwise/clockwise operation, small corner-to-corner dimension, long service life due to rol-
ler bearings in motor and gearbox, chuck with central bolt for protection against loosening in
anticlockwise operation, spindle neck Ø 43 mm, with metal keyless chuck, secondary handle and
depth stop.
Order ID 466080.0300
Type GBM 13-2 RE Prof.
Power consumption W 750
Idle speed min -1 0...1000 / 0...3000
for aluminium mm 20
for steel mm 13
for wood mm 32 466080.0300
Drill chucks mm 1...13
Spindle thread 1/2“ - 20 UNF
Weight kg 2.4
4 66110 Drill METABO
Die-cast aluminium gearbox housing, ergonomically shaped housing with large switch pushbutton,
mechanical two-speed gear unit, Variospeed (V) electronics, Metabo S-automatic safety clutch,
clockwise/anticlockwise operation, maximum power even in anticlockwise operation due to rota-
table carbon brush bridge, thumbwheel for presetting the speed. Drill spindle with 1/4“ hexagon
socket for screwdriver bits. Package content: keyless chuck Futuro Plus, secondary handle.
Order ID 466110.0060
Type BE 751
Power consumption W 750 BE 751
Idle speed min -1 0...1000 / 0...3100
Torque Nm 30
for steel mm 13
for wood mm 40
Drill chucks mm 1.5...13
Spindle neck Ø mm 43
Spindle thread 1/2“ - 20 UNF
Weight kg 2.6

4 66160 Angle drill BOSCH
slim rod motor, particularly easy to handle; also for left-handers, optimal for use in hard-to-reach
places, accelerator electronics and the preselection with thumbwheel, clockwise/anticlockwise ope-
ration, also for screwdriving. Corner-to corner-width 23 mm, key-type chuck built-in.
Order ID 466160.0100
Type GWB 10 RE
Power consumption W 400
Idle speed min -1 0...1300
for light metal mm 12
for steel mm 10
for wood mm 22
Drill chucks mm 1...10
Weight kg 1.6
4 66170 Angle drill MAKITA
slim motor for optimum handling, recessed drill chuck, ideal for hard-to-reach locations, handy
safety switch with lock-out, continuously variable speed control for precise pilot drilling and for
setting screws, anticlockwise/clockwise operation, LED lighting onto the tool. Delivery scope:
key-type drill chuck with key, secondary handle, Carry case.
Order ID 466170.0150
Type DA3010FJ
Power consumption W 450
Idle speed min -1 0...2400
for steel mm 10
for wood mm 21
Drill chucks mm 1.0...10
Head height mm 79
Length mm 270
Weight kg 1.6
4 66180 Angle drill FEIN
high-torque motor, metal gear head for the heaviest stresses, continuously variable speed control,
clockwise/anticlockwise operation, for drilling and screwdriving in hard-to-reach places, high run-
ning accuracy. Small corner-to-corner dimensions of 17 mm, key-type chuck.
Order ID 466180.0200
Type WBP 10
Power consumption W 500
Speed min -1 0...1830
for aluminium mm 15
for steel mm 10
for wood mm 25
Drill chucks mm 0.8...10
Taper drill chuck B 10
Head height mm 96
Weight kg 1.5 Diagonal width 17 mm

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2461