Page 2378 - Benma | Blue book 5.0

Lifting, conveying and securing Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
453440 Permanent lifting magnet FUTURO
For flat and round material, electrically activated, for lifting relatively light workpieces, max.
operating temperature +80°C.
Order ID 453440.0100 453440.0200 453440.0300
Lifting force for flat material kN 1 3 6
Lifting force for round material kN 0.45 1.35 2.7
Length mm 107 180 255
Width mm 60 90 115
for Ø max. mm 150 250 350
Height mm 120 156 212
Weight kg 2.5 8.6 21

453460 Handheld lifting magnet
with handle and release lever (parts are released when the release lever is pulled up). For collecting
iron pieces in galvanic baths, boxes, on the floor, or in casting sand. For unloading and lifting small
parts on machines, etc.
Order ID Lifting force for small parts Ø Height
N mm mm
453460.0100 300 112 178

453471 Magnetic lifter for metal sheets
Light, powerful lifting magnet for safe transport of sheet metal, plates and profiled strips with
clean, flat surfaces. Especially well suited to lifting thin metal sheets one at a time from a stack. No
risk of hand injury. An offset on the D handle makes it easier to lift the sheet off.
Order ID Lifting force Length x Width Height Height with handle Weight
kN mm mm mm kg
453471.0100 1.4 160 x 150 25 175 1.5

453500 Vacuum lifting pads VERIBOR
Aluminium body; for lifting, carrying, holding sheet metal, plastic parts, glass and all other parts
with flat surfaces.
Order ID Type Lifting force Length Width Height
kN mm mm mm
453500.0150 602.0 BL 0.7 320 120 90
453500.0300 602.4 BL 0.6 345 120 80 602.4 BL 602.0 BL
453700 Cable puller BISON
indestructible design with very high reliability, wire rope passes through - unlimited pulling length,
device with telescopic operating lever, 20 m pull rope on reel, 3 shear pins.
Order ID Tensile force Lifting force Length Height Width Weight
kN kN mm mm mm kg
453700.0100 12 8 535 260 125 9
453700.0200 25 16 620 320 150 18
453700.0300 48 32 680 345 150 29
453710 Ratchet cable pull
MINI MULE
ideal for lifting, lowering, moving of loads or tensioning of wire nets, etc.; short, reinforced
housing, pawls of rolled, hardened steel plates, pins, eyebolts and rivets of thermically treated
steel, standardised, galvanised aircraft steel cable, leverage 18:1.
Order ID Carrying capacity Lift height Cable Ø Weight
t mm mm kg
453710.0100 0.75 5490 4 3
453710.0200 1 3660 4.8 3.2
453710.0300 2 1830 4.8 3.4

453720 Ratchet Lever Hoist PULL BULL
with link chain, rugged all-steel construction, designed for long service life; for pulling, tensioning,
lifting, lowering, anchoring, etc.; tested with 25% overload.
Other lifts are available at short notice.
Order ID Carrying capacity Lift height Dimension: hook/hook Hook opening Weight
t mm mm mm kg
453720.0100 0.75 1500 295 25 6.9
453720.0200 1.5 1500 325 32 9.8

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 2367