Page 1980 - Benma | Blue book 5.0

Oiler, lubricant and coolant systems Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
4 01120 High pressure grease gun ABNOX
One-handed operation with maximum pressure application, ground high-pressure piston, grease
cylinder of steel pipe, promatised, with curved tube 180 mm long and hydraulic gripper head,
pressure up to 400 bar, delivery rate 0.5 cm2, connecting thread G 1/8“, for normal open filling.
Order ID 401120.0100 401120.0200
Contents ml 120 120
Cylinder mm 40 x 150 40 x 150 without filler
Length without pipe mm 320 320
Designation without filling connection with a connection for direct filling with a
filler pump 401300
4 01130 One-hand oil gun ABNOX
One-handed operation with maximum pressure application, ground high-pressure piston, grease
cylinder of steel pipe, promatised, with curved tube 180 mm long and hydraulic gripper head, for
mineral oils.
Use special piston 401022 for synthetic oils.
Order ID 401130.0100 for oils
Contents ml 120
Pressure up to bar 400
Delivery rate cm³/min 0.5
Cylinder mm 40 x 150
Length without pipe mm 320
Threaded connection G 1/8“
4 01150 One-handed grease gun ABNOX
optimal weight distribution facilitates easy work, high pressure application with minimal force re-
quired, solid construction, for cartridge filling and normal open filling.
Model for low viscosity mineral oils is also available.
Greases see 422140-522640.
Order ID Contents Pressure up to Delivery rate Threaded connection
ml bar cm³/stroke
401150.0100 400 / 500 600 0.5 G 1/8“
4 01190 Battery grease gun MATO
Rugged, with filling/venting valve for 400 g grease cartridges or 500 g bulk grease. With high-
performance DC electric motor with planetary gear and crank drive, is limited by a pressure relief
valve. Supplied with controlled quick charger with overcharging protection (2 h normal charging
time), high-pressure armoured rubber hose 750 mm ( burst pressure 1.650 bar) with 4-jaw hydrau-
lic gripper nose piece, in plastic case with second battery and a grease cartridge
For spare battery and charger see 401192.
For grease, see 422140-522640.
Order ID Contents Delivery rate Pressure up to Battery voltage Threaded connection
g cm³/min bar V
401190.0100 400 / 500 100 400 14.4 G 1/8“
4 01192 Accessories MATO
For Battery grease gun 401190.
Order ID Designation
401192.0100 Battery Li-Ion 14.4 V 3000 mAh, charging time approximately 2 h
401192.0200 Quick charging device 230 V 50 Hz, 14.4 DC, ON/OFF LED indicator lamp
401192.0100 401192.0200

4 01300 Filler pump ABNOX
rugged construction, indispensable for all grease guns with filling connections and for hand push
guns thanks to practical filler plate, air and dust-free lubrication of all bearing points, neat filling of
the lubricating devices; scope of supply: pump assembly, cover, follower piston plate, standpipe,
dust cap, protective pot.
Drum trolley for mobil use see 401320.
Pneumatic feed pumps on request.
Order ID for packs Bowl
kg mm
401300.0100 14...18 Ø 300 x 380
401300.0200 20...25 Ø 375 x 480

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1969