Page 1839 - Benma | Blue book 5.0

Striking tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
353475 Parallel pin punch FUTURO
DIN 6450, in chrome-vanadium air-hardening steel, octagonal shank, fully tempered, ground and
polished, rounded edges. Impact head tempering to DIN standard largely eliminates chipping and
bulge formation.
For pin punch set, see 353480.
Order ID Ø Mandrel length Length Shaft thickness
mm mm mm mm
353475.0100 2 30 150 10
353475.0200 2.5 30 150 10
353475.0300 3 40 150 10
353475.0400 4 50 150 10
353475.0500 5 50 150 10
353475.0600 6 50 150 10
353475.0700 7 50 150 10
353475.0800 8 50 150 10
353475.0900 9 50 150 12
353475.1000 10 50 150 14
353475.1100 12 50 150 14
353475.1200 14 50 150 16
353480 Parallel pin punch set FUTURO
Set of 6 parallel pin punches 353475 in plastic holder. DIN 6450, in chrome-vanadium air-harde-
ning steel, octagonal shank, fully tempered, ground and polished, rounded edges. Impact head
tempering to DIN standard largely eliminates chipping and bulge formation.
Order ID Size
mm
353480.0100 3 4 5 6 8 10

353491 Parallel pin punch with guide sleeve FUTURO
Chrome-vanadium steel, zinc chromated, guide sleeve knurled, punch pin hardened. Ø 0.9 to 4.9
mm with loose guide sleeve, Ø 5.9 mm with fixed sleeve.
For drift punch set, see 353541.
Order ID Ø Order ID Ø
mm mm
353491.0100 0.9 353491.0600 3.4
353491.0200 1.4 353491.0700 3.9
353491.0300 1.8 353491.0800 4.9
353491.0400 2.4 353491.0900 5.9
353491.0500 2.8

353521 Set of parallel pin punches with guide sleeve FUTURO
8 pcs 353491, in plastic holder, made of chrome-vanadium steel, zinc chromated, guide sleeve
knurled, punch pin hardened. Ø 0.9 to 4.9 mm with loose guide sleeve, Ø 5.9 mm with fixed
sleeve.
Order ID Ø
mm
353521.0100 0.9 1.4 1.8 2.4 2.8 3.4 3.9 5.9

353541 Set of parallel pin punches with guide sleeve FUTURO
8 x 353491, in plastic pocket. Chrome-vanadium steel, zinc chromated, guide sleeve knurled,
punch pin hardened. Ø 0.9 to 4.9 mm with loose guide sleeve, Ø 5.9 mm with fixed sleeve.
Order ID Ø
mm
353541.0100 0.9 1.4 1.8 2.4 2.8 3.4 3.9 5.9

353600 Parallel pin punch FACOM
impact-damping haft, finger protection.
Order ID Ø Mandrel length Length Order ID Ø Mandrel length Length
mm mm mm mm mm mm
353600.0100 2 35 140 353600.0600 8 86 216
353600.0200 3 45 150 353600.0700 10 100 230
353600.0300 4 60 190 353600.0800 12 130 280
353600.0400 5 70 200 353600.0900 14 140 290
353600.0500 6 80 210 353600.1000 16 160 310

1828 Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch