Page 1802 - Benma | Blue book 5.0

Electrician‘s tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 51171 Installation tester BEHA-AMPROBE PROINSTALL
The Telaris multifunction installation testers by BEHA AMPROBE were designed for the electrical
professional to be able to test electrical installation safety in residential buildings and commercial
and industrial facilities.
The Telaris ProInstall is ruggedly built and therefore can be used in challenging environments where
great importance is attached to productivity and accuracy. Not only is it possible to test the elec-
trical installation with great accuracy using the tester, but thanks to the automatic test sequence,
results can be arrived at and errors corrected faster too.
Designs:
351171.0010 PROINSTALL-100-D The Telaris PROINSTALL-100 was developed to carry out the
following safety measurements of electrical installations in accordance with EN 61557: insulation
resistance, RCD tests, low ohm resistance, loop impedance and phase sequence
351171.0020 PROINSTALL-200-D The Telaris PROINSTALL-200 was developed to carry out the
following safety measurements of electrical installations in accordance with EN 61557: insulation
resistance, RCD tests, low ohm resistance, loop impedance and phase sequence, testing of hi
current sensitive RCD/FI (Type B), memory for approx 1000 measurements, earthing measurement
(optional with probe), RCD/FI analysis for testing every parameter of an RCD/FI
351171.0030 PROINSTALL-100-CH The Telaris PROINSTALL-100 was developed to carry out the
following safety measurements of electrical installations in accordance with EN 61557: insulation
resistance, RCD tests, low ohm resistance, loop impedance and phase sequence
351171.0040 PROINSTALL-200-CH The Telaris PROINSTALL-200 was developed to carry out the
following safety measurements of electrical installations in accordance with EN 61557: insulation
resistance, RCD tests, low ohm resistance, loop impedance and phase sequence, testing of hi
current sensitive RCD/FI (Type B), memory for approx 1000 measurements, earthing measurement
(optional with probe), RCD/FI analysis for testing every parameter of an RCD/FI
Order ID Type Version
351171.0010 PROINSTALL-100-D The Telaris PROINSTALL-100 was developed to carry out
the following safety measurements of electrical installati-
ons in accordance with EN 61557: insulation resistance,
RCD tests, low ohm resistance, loop impedance and
phase sequence
351171.0020 PROINSTALL-200-D The Telaris PROINSTALL-200 was developed to carry out
the following safety measurements of electrical installati-
ons in accordance with EN 61557: insulation resistance,
RCD tests, low ohm resistance, loop impedance and pha-
se sequence, testing of hi current sensitive RCD/FI (Type
B), memory for approx 1000 measurements, earthing
measurement (optional with probe), RCD/FI analysis for
testing every parameter of an RCD/FI
351171.0030 PROINSTALL-100-CH The Telaris PROINSTALL-100 was developed to carry out
the following safety measurements of electrical installati-
ons in accordance with EN 61557: insulation resistance,
RCD tests, low ohm resistance, loop impedance and
phase sequence
351171.0040 PROINSTALL-200-CH The Telaris PROINSTALL-200 was developed to carry out
the following safety measurements of electrical installati-
ons in accordance with EN 61557: insulation resistance,
RCD tests, low ohm resistance, loop impedance and pha-
se sequence, testing of hi current sensitive RCD/FI (Type
B), memory for approx 1000 measurements, earthing
measurement (optional with probe), RCD/FI analysis for
testing every parameter of an RCD/FI

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1791