Page 1742 - Benma | Blue book 5.0

Electronics and watchmaker‘s tools Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
3 46920 Electronic diagonal cutters BAHCO

Bahco 2666 FK/2648 A,
High-performance steel alloy, chrome-plated, high-gloss polished, pointed cutting head, bolted
precision joint, opening springs, plastic handles, induction-hardened cutting edges 63-65 HRC,
without bevel, for flush cutting.
Order ID Length for soft wire
mm mm
346920.0100 113 0.2...1.25
346920.0200 125 0.3...1.6
3 46950 Electronic diagonal cutters KNIPEX

Knipex 7932 ESD, DIN ISO 9654, chrome-vanadium ball-bearing steel, forged, black-oxide finish,
bolted joint, ergonomic dual component handle sheaths, opening spring, pointed head, very pre-
cisely ground and sharp cutting edges with very small bevels, induction-hardened, hardness
approx. 64 HRC.
Order ID Length for soft wire for hard wire
mm mm mm
346950.0100 125 0.2...1.5 0.6
3 46952 Electronic diagonal cutters KNIPEX

Knipex 7932 ESD, DIN ISO 9654, chrome-vanadium ball-bearing steel, forged, black-oxide fi-
nish, bolted joint, ergonomic dual component handle sheaths, ESD-safe – dissipative, opening
spring, pointed head, very precisely ground and sharp cutting edges with very small bevels,
induction-hardened, hardness approx. 64 HRC.
Order ID Length for soft wire for hard wire
mm mm mm
346952.0100 125 0.2...1.5 0.6
3 46960 Electronic diagonal cutters KNIPEX

Knipex 7942 ESD, DIN ISO 9654, chrome-vanadium ball-bearing steel, forged, black-oxide finish,
bolted joint, ergonomic dual component handle sheaths, opening spring, pointed head, very pre-
cisely ground and sharp cutting edges without bevels, for flush cutting, induction-hardened,
hardness approx. 64 HRC.
Order ID Length for soft wire
mm mm
346960.0100 125 0.1...1.5
3 46962 Electronic diagonal cutters KNIPEX

Knipex 7942 ESD, DIN ISO 9654, chrome-vanadium ball-bearing steel, forged, black-oxide finish,
bolted joint, ergonomic dual component handle sheaths, ESD-safe – dissipative, opening spring,
pointed head, very precisely ground and sharp cutting edges without bevels, for flush cutting,
induction-hardened, hardness approx. 64 HRC.
Order ID Length for soft wire
mm mm
346962.0100 125 0.1...1.5
3 46965 Electronic diagonal cutters KNIPEX

Knipex 7952, DIN ISO 9654, chrome-vanadium ball-bearing steel, forged, black-oxide finish, bol- with wire clamp
ted joint, ergonomic dual component handle sheaths, opening spring, pointed head, with wire
clamp – meaning that the cut wire cannot fly loose, very precisely ground and sharp cutting
edges with very small bevels, induction-hardened, hardness approx. 64 HRC.
Order ID Length for soft wire for hard wire
mm mm mm
346965.0100 125 0.2...1.3 0.5

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1731