Page 1594 - Benma | Blue book 5.0

Torque tools and torque testers Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
331991 Torque screwdriver WIHA
iTorque

Wiha 2835, torque screwdriver with digital display for interchangeable blades; can be conve-
niently adjusted in the printed range without extra tools using the adjusting wheel at the handle
end. The torque that is set can be read immediately from the display on the handle. When the set
torque is reached, the screwdriver releases with a clearly audible and tactile signal. With integrated
„ClickControl“ counting function that monitors all uses and prompts recalibration after 5000 uses
by displaying „CAL“ in the indicator. Individual calibration alarm cycles (e.g. 2000 uses) and engra-
ving of your testing equipment number are possible on request. Precision ± 6% in accordance with
EN ISO 6789. Possibility of displaying in Nm/in.lb or Ncm/in.oz. Ergonomic plastic-metal composite
handle. Receptacle for blade inserts with 4 mm hexagon. Supplied with bit holder blade for 1/4“
C 6.3 bits, factory test certificate.
Order ID Working range Working range Handle length
Nm cN·m mm
331991.0100 - 40...150 134
331991.0200 0.8...3.0 - 134
331991.0300 1.0...6.0 - 134

331993 Torque handle PB Swiss Tools
DigiTorque

PB 8320, Torque handle with digital display for interchangeable blades; can be adjusted in the
printed range with the supplied key. The torque that is set can be read immediately on the display
on the end of the handle. When the set torque is reached the screwdriver is triggered with a clearly
audible and tactile signal. The triggering torque is +100% of the set value, screws that have already
been tightened can be slackened again without difficulty. Supplied with an adjusting spanner, fac-
tory test certificate, accuracy ± 6% according to EN ISO 6789, without interchangeable blades
(see 336100 - 436158).
Order ID Range Division Handle length
Nm Nm mm
331993.0100 0.1...0.8 0.05 120
331993.0200 0.4...2.5 0.05 120
331993.0300 1.0...5.0 0.05 120

331994 Torque handle PB Swiss Tools
DigiTorque

PB 8325, Torque handle with digital display for interchangeable blades; can be adjusted using
the wrench supplied. The torque that is set can be read immediately on the display. When the
set torque is reached the torque handle releases the force with an audible and tactile signal. The
unscrewing torque is +100% of the set value, screws that have already been tightened can be
unscrewed again without difficulty. Delivered with setting key, factory test certificate; accuracy ±
6% in accordance with EN ISO 6789; without interchangeable blades (see 336020 - 436061).
Order ID Range Division Weight
Nm Nm g
331994.0100 3.2...16 0.1 280

331996 Torque handle PB Swiss Tools
MecaTorque
PB 8316A, Torque handle with infinite mechanical adjustment on the handle‘s end can be set wi-
thout accessory tool; for interchangeable blades; display with analogue scale, can be recalibrated 331996.0100
with the code supplied. When the torque set is reached, the torque handle triggers an audible
signal. The unscrewing torque is +100% of the set value, screws that have already been tightened
can be unscrewed again without difficulty. Delivered with recalibration tool, factory test certificate;
accuracy ± 6% in accordance with EN ISO 6789, interchangeable blades not included (see
336890 - 436910).
Order ID Working range Handle length Division Weight
cN·m mm Nm g
331996.0100 10.0...50.0 106 0.01 94

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1581