Page 1432 - Benma | Blue book 5.0

Wire brushes Tel. +41 44 736 63 63 • Fax +41 44 736 63 00 • sales@brw.ch
391060 Brass circular brush ZEINTRA
Crimped brass wire, for work on cast bronze, on copper, brass etc., non-sparking.
Reduction bushings see 391150.
Order ID Ø x Wire thickness Width Hole Max. Speed
mm mm mm min -1
391060.0100 100 x 0.15 20 20 5 000
391060.0200 125 x 0.15 20 20 5 000
391060.0300 150 x 0.15 20 20 5 000
391080 Circular brush ZEINTRA
Nylon brush with silicon carbide abrasive grit. For cleaning, polishing, deburring, grinding
of sheet metal, etc., especially of chrome steel and aluminium, conforms very well to uneven
surfaces thanks to high flexibility; strong and uniform grinding action; does not scratch.
For reduction bushings, see 391150.
Order ID Ø x width Grain Wire thickness Hole Max. Speed
mm mm mm min -1
391080.0030 125 x 20 120 1 20 5 400
391080.0050 125 x 20 180 0.9 20 5 400
391080.0080 150 x 20 120 1 20 5 400
391080.0100 150 x 20 180 0.9 20 5 400
391150 Reduction bushings
suitable for all circular brushes with bore 20 mm, per pair.
Order ID Inside Ø Outside Ø Order ID Inside Ø Outside Ø
mm mm mm mm
391150.0100 8 20 391150.0500 14 20
391150.0200 10 20 391150.0600 15 20
391150.0300 12 20 391150.0700 16 20
391150.0400 13 20 391150.0800 18 20

391170 Mounting mandrel
for circular wire brushes. The reducing sleeve 391150 Ø12 mm must be ordered separately.
Order ID Shaft Ø Holder Ø
mm mm
391170.0100 8 12

391220 Buffing discs
of cotton, for polishing of stainless steels, non-ferrous metals, etc.
For polishing pastes, see 391350 - 491360. For tool holders, see 391300.
Order ID Ø x width Hole Order ID Ø x width Hole
mm mm mm mm
391220.0050 80 x 10 10 391220.0300 150 x 25 14
391220.0100 100 x 15 10 391220.0400 200 x 25 20
391220.0200 120 x 20 10

391240 Felt wheel PFERD
Mainly for high-gloss polishing applications. Recommended cutting speed 5 - 10 m/s.
For diamond polishing pastes, see 380140 - 480160.For grinding and polishing pastes, see 381840,
391350 - 491360.For tool holders, see 391300.
Order ID Ø x width Hole Recom. Speed
mm mm min -1
391240.0100 80 x 10 10 1 000...2 000
391240.0200 100 x 20 10 900...1 800
391240.0300 125 x 20 20 750...1 500
391240.0400 150 x 25 20 600...1 200

391300 Tool holders
For felt discs 391220 and buffing discs 391240. Considerably reduces setup times; the attachment
tool can be changed without unclamping the holder from the power tool‘s chuck.
Order ID Holder Ø Shaft Ø Clamping capacity
mm mm mm
391300.0100 10 8 6...20
391300.0200 20 12 10...50

Brütsch/Rüegger Tools Ltd. • Heinrich Stutz-Strasse 20 • P.O. Box • CH-8902 Urdorf • www.brw.ch 1419